This special edition Mega card storage box is designed to be compatible with the magic the gathering card game. It has a beautiful set of engravings on all 4 sides and the lid. Each side has 3 cut out circles allowing you to see to the next layer. This creates depth to the design and is very impactful. The box is made of Birch plywood & MDF and can hold up to 4700 cards.
While being beautiful and practical it is also designed to fit into the Kalax style shelving units from Ikea. You can fit up to 3 of these boxes in 1 Kalax cube.
The box measures 385x330x108mm.
Inside there is a MDF insert that has 5 internal rows for storing your cards.
It comes with 30 dividers to help you organise your card collection.
You can choose to add 3 token/dice trays with the box. These have 2 sections each and stack up inside the box. This can be seen in the listing pictures.
Depending on how many dividers are used it can hold up to 4700 unsleeved cards and up to 2700 sleeved cards.
To help keep costs low and wastage down we use as much of the wood as possible. Any patches/excessive marks in the wood will always be used only where they will not be seen/are covered by other pieces of wood. This helps us make sure that we do not waste wood and effect the environment needlessly.
The box is made from a combination of 3mm Birch plywood and MDF. It comes flat packed and is assembled easily using wood glue.
Custom engraving:
If you would prefer the box to be engraved with a specific symbol, design or drawing etc then you can tell us that in the comments box and then email us directly your artwork to customisedgaming@hotmail.com please quote your order number in the email.
The size and positioning of the engraving will be similar to that in the examples photographs. There may be slight variances due to the shape and design of your artwork.
For the best results the design/artwork should be black & white (although coloured images can be used) and should be line art/simple type designs. Ultimately we can engrave any image/design you provide however the end results may not be as good/well defined if the advice above is not followed.
If you are unsure then please email us with your image and questions and we will offer advice as best we can.
The artwork must be of your own design and /or free from any copyright, trademark or any other legal protection unless you have the permision of the owner to use it. It is your responsibilty to provide us with a design that is legal for us to engrave. Customised gaming will not engrave any logo/design that we knowingly know to be under legal protection.
